### Archive

- June 2015 (1)
- May 2015 (1)
- March 2015 (1)
- January 2015 (1)
- December 2014 (1)
- July 2014 (1)
- June 2014 (1)
- April 2014 (1)
- March 2014 (1)
- January 2014 (1)
- August 2013 (1)
- July 2013 (1)
- June 2013 (1)
- May 2013 (1)
- April 2013 (1)
- March 2013 (1)
- February 2013 (2)
- December 2012 (1)
- November 2012 (2)
- October 2012 (1)
- September 2012 (1)
- August 2012 (1)
- July 2012 (2)
- June 2012 (1)
- May 2012 (1)
- April 2012 (2)
- March 2012 (1)
- February 2012 (1)
- September 2011 (2)
- July 2011 (2)
- June 2011 (1)
- May 2011 (1)
- April 2011 (2)
- February 2011 (1)
- December 2010 (1)
- November 2010 (1)

## Unity Origami

Last month I posted a few pictures of folded circles on Wholemovement Facebook page. Some of you may have wondered how the complexity was achieved from paper plates circles. I thought it might be of interest to see the process of folding the triangle grid matrix that generates the forms used in assembling those and many other complex systems I have recently been exploring.

This process is similar to unit origami in that you are joining similar paper units to form complex systems. The similarity stops there. Because we are using circles and the circle demonstrates unity beyond all other shapes and forms, we then might call folding paper circles “unity” origami. This is not the unity of adding things together, it is a singular unity wherein all things are already together as potential. It is then only a matter of giving individual expression through reformation of the circle and various arrangements in combination. Squares, triangles, and all other reformations of the circle are never less than the Whole circle. They are all formed from the same folded grid, simply reformed differently in multiples and joined. Unity origami does not carry the limitations and restriction that come along with folding square units. The circle demonstrates spherical unity revealed through patterned movements of reformation that are inherent only with the circle.

Steps in folding an equilateral triangle grid matrix.

First fold the circle in half by touching any two points on the circumference together, a simply process of self-aligning of the circle.

Fold one end point of the half folded circle to a position half way between the two edges as you change the length by moving along the circumference arc. Do not try to measure; use your eyes to see the proportions. It may be easier to look for equal angles keeping the circumference even.

Do not crease yet.

** **

Fold unfolded part under and line up the end points; one fold over and one fold under like a “Z”. When the points are touching the edges will be even. After turning over and checking both sides to see that everything is even, t**hen crease**. (This is the hardest part of the entire process, it requires using your eyes coordinating with your fingers.)

Open to the circle; there are three diameters dividing the circle in six equal sections, seven points. There are three choices to continue folding point to point. We will take one; the other two will also lead to the same complete 8-frequency grid.

Fold end point of one diameter to the opposite end point and crease. Do that the same with all three diameters; end to opposite end. This generates three more diameters that now divides the circle into twelve equal sections.

Fold one end point to the center point and crease.

Open the circle. The radius of the folded diameter is now divided in half and with the fold between radii of two diameters forms an isosceles triangle. Fold one end point from the first fold (the isosceles triangle) to the center similar to before and crease.

Continue around the circle touching every end point of each isosceles triangle to the center and creasing (this is every other end point to the center.)

When you are back to where you started there will be a folded hexagon star of two intersecting inscribed triangles and three bisecting diameters. The three diameters form six star points with three bisecting diameters half way between each star point.

Each diameter now has two new points of intersection not there before. Each star point diameter is divided into four equal sections. I call this a 4-frequency diameter grid. The hexagon diameters are divided equally, the bisecting diameters are unequal in division. Does this look like the circle you just folded?

Start with the one diameter; two end points, the center point and two new points that divide the diameter into four equal segments.

Fold the end point to the furthest new point on the same diameter and crease.

Fold the same end point to the closest new point on the same diameter and crease.

There are now three parallel folds that divide one radius into four equal sections. Do this to each star point diameter (six times.) If you go from one to the other in sequence you will know when you are finished coming to the first crease.

You have folded a grid of three diameters where each is divided into eight equal sections.

This I call an 8-frequency diameter grid. The three bisecting diameters are now part of the grid of three sets of seven parallel lines each. It is like an octave in music. All the notes you need are there to form endless arrangements between any combination using endless possibilities of intervals. The other two choices with the first three diameters that we did not take are now folded within this 8-frequency grid.

This octave can be further divided by following the same process of folding the same six end points to the new points of intersection on each individual diameter dividing each section again in half. It goes from the first fold 1, 2, 4, 8, 16, 32 and so on, until you reach the size limitation of the circle. If you want to take it to a higher frequency start with a larger circle.

The following pictures show the development from the first, a 1-frequency grid to a 32-frequency grid. The higher the frequency the greater complexity can be generated from folding one circle. It is the 8-frequency octave that is fundamental to scaling in and out, all to the pattern of three.

The pattern does not change while the possibilities in reconfiguring a single circle build in complexity with the increase in frequency. Kids in workshops sometimes fold a 32-frequency grid after showing them only the 8-frequency. They did not know what to do with it when done because of the enormous amount of information, but they felt acommplished doing it. You will get the most out of a higher frequency grid if you have worked with increasing levels of frequencies first. Some students find it a challenge and engaging to just fold and explore the possibilities of reconfiguring a high frequency grid of creases.

You can see this process is straight forward always generating information to continue the folding. Each of these individual frequency levels have different directions to explore and will reveal very different reconfigurations of the circle and when you start combining them the possibilities become endless. This is not different that any other kind of frequency modulation except you are doing it with a circle.

The more you understand the tetrahedron as basic to all pattern formation and that the other four regular polyhedra are patterned arrangements for reconfiguring and joining the more you will get from various frequency gird levels. Go to the previous five "Center Off-Center" blogs for more information about some basic instruction for folding the tetrahedron, octahedron and the icosahedron.

There is another useful folding for all frequency levels. I call it an in-folded hexagon rather than an inscribed hexagon since we are folding it in; unless you figure we are drawing it out from the circle by creasing. The hexagon comes directly from the in-folded equilateral triangle.

Here is a 16-frequency folded grid circle. Fold the circumference in forming the equilateral triangle. Each side is folded under the previous side locking one into the other.

The equilateral triangle is folded in half forming a right triangle. Fold each diameter, the three perpendicular bisectors, one at a time.

Open the triangle and put the circumference folds on the outside making three small vesicas. This is a another way to see the proportional difference between the diameter length and distance around the circumference. This proportional folding demonstrates what we call pi.

Open to the circle and fold in the circumference informing a hexagon shape. This is a more familiar representation of pi. There are now many more possibilities for using the circumference in exploring all levels of reconfiguring the circle.

For your first time in folding the grid do not be over concerned if all lines are not exactly parallel, some will be slightly off, but with attention to touching points they will all be close enough. Remember when points are touching the lines will be where they need to be, and subsequent points will be in alignment.

This is not a difficult process and it will become clear as you begin fold by fold. I would like to hear about and see and what you come up with. Feel free to contact me if you have questions or need help with folding.

Enjoy the exploration.