wholemovement

Toggle

Login

Friday, 28 December 2012 05:34

In/Out Hyberbolic Surface

Written by 
Rate this item
(0 votes)

Picking up on last months entry I went a little further in exploring the hyperbolic surface since having observed for many years that it is inherently within the folding of the circle. First it was necessary to crumple some paper and to look to see what happens in a random act. There is no order to the surface plane when crumpling a piece of paper (in this case a paper plate circle.) The reforming of the surface is arbitrary,  unpredictable, and sometimes with interesting results.

 

001img 5881es                 002img 5883es

 

 

The surface is contained by the edge showing a chaotic wave action taking place in the plane as the interior surface moves perpendicular away from the flat plane forcing the edge to move in two opposite directions. There is a warping of mountains and valleys that move through the horizontal  surface plane. Other than the random forming it is similar to dropping an object in still water. A tension and compression is created in the movement through the plan that reflects the dynamics in compressing the sphere to a circle disc. The outward tension gives balance to the inner compression.

003tens-comp

 

Below)  The hyperbolic surface is mathematically portrayed as a smooth curved saddle form in two directions, a distortion of the square shaped plane. It shows an underlying tetrahedron pattern inherent in opposing right-angled movement.

004asaddletetra3

 

Below) Looking from a polygon perspective there are three basic modes of planer forming.  Starting in the center there is the hexagon surrounded by hexagons (6,) a flat tiling plane. The pentagon surrounded by hexagons (5) shows openings between hexagons where a continuous surface must curve away from the plane in a spherical direction. The heptagon surrounded by hexagons (7) finds overlapping of planes that must buckle off the plane to keep a continuous surface. This demonstrates a hyperbolic plane.

005.456

 

Below) Start by folding three diameters into the circle; that is the hexagon pattern with seven points. There are six equal areas (6.) The circle can be reformed by folding in one radius a pentagon pattern of 5 (6-1), to the square pattern of 4 (6-2,) then to the 3 pattern (6-3 on right.) With each decrease in parameter there is an increase in height, a precessional movement off the circle plane. There are two ways to decrease the circle by half (6-3), one an in/out star-like configuration (left) and the other a tetrahedron (right.)

006.3-4-5s

 

Above) Each increase in altitude shows a decrease in circumference and when all are in alignment on the flat circle of origin there are concentric rings that correlate to the eight divisions across the circle; a folded 8-frequency diameter circle ( http://wholemovement.com/blog/itemlist/date/2011/2?catid=140)

 

Below) Each decrease is inscribed onto one circle, then accordion pleated in alternate fashion. This forms a hyperbolic curve to the surface going up and down in perpendicular direction to the plane. The saddle curve is seen in the reformed edges not the continuity of surface.

 

007img 6126es              008img 6009es

 

009saddle

Above) Three points on the saddle surface form an inward curving triangle. The same three points also show a relationship off the surface to be a flat open triangle plane. By locating a fourth point anywhere on the surface, a tetrahedron pattern of six relationships and four triangle open planes are formed.

 

Below left) A paper plate circle with five inscribed circles accordion folded forms an extreme saddle configuration. Many people have done this; most notably Jose Albers with his students in the 1920s at the Bauhaus School in Germany and later in the 1940’s at Black Mountain College in North Carolina. There are more current variations by others slicing through the circle and cutting out the center. Here the circle remains whole keeping unity throughout, which I believe was the point of the exercise in the first place.

Below right) Two circles are reformed and joined, one into the other.

010img 5999es           011img 6012es

 

Concentric circles give order to the plane by determining where the surface will go. With crumpling the circle the same dynamics randomly occurs  without any sense of order.

When three diameters are folded into the circle a similar ordering occurs as seen in the concentric circles. The 8–frequency triangular grid is a straight-line polyhedral reflection of concentric circles. The above illustration using three diameters shows the flat hexagon transformation from 6 into 5 the pentacap, to 4 the square based pyramid, and 3 the tetrahedron; all revealed in concentric circles and formed using straight lines all self-referrenced to the circle through proportional movement.

 

012img 5557es       013img 5872es

Above) Using the 8-frequency grid shows a simple folding of two views of reconfiguring the in/out of the circumference.

 

 

014img 5892es            015img 5888es

Above)  On the left is arbitrary crumpling to the center where on the right are combined a few of the folds from the 8-frequency grid giving an interesting combination of a semi-controlled crumple.

 

Below) Two variations where the circumference is more controlled by the regular symmetry towards the interior of the circle using a 3-fold symmetry.

016img 5885es        017img 5850es

 

Below) This show basic opposite direction folding where the center is going in one direction and the circumference moving at right angle in the other, much like the saddle only in angular form. A tetrahedron interval is formed at the center by two solid faces and two open faces of triangles; four points and five edges of six relationships.

There is a slight fold variation between the left and right hand pictures.

018img 6172es         019img 6070es

 

020img 6308es        021img 6291es

Above) Two units on the left shown above have been joined bringing the open tetrahedra together forming a double saddle system with a solid tetrahedron center. Two views.

 

Below) A picture from lost month  http://wholemovement.com/blog/itemlist/date/2012/11?catid=140  shows the same hyperbolic organization around the center tetrahedron as above, only this is formed using the 4-frequency folded grid and shows a single saddle-like system.

022img 5900es

 

 

 023img 5954es

Above) Four circles were folded to a tetrahedron net of nine creases and crumpled into balls, flattened out to the circle and joined in a tetrahedron pattern. The surface is determined by the random crumpling of the circles and does not affect the patterned arrangement of four circles; the curmpled surface gives interest to the form.

 

024img 5976es

Above) The four-circle sphere from above with four circles added to it, each a reformation of the tetrahedron net forming three pronges each.

 

025img 6247es

 

                                025aimg 6257es

Above) Two views of the above system with four more circles added that have been reconfigured from the 8-frequency diameter grid; one to each  three pronged extension. Three are a slight variation to the other two and one is in the form of an icosahedrom.

 

       

   026img 6191es

Above) This is another direction in developing the above tetrahedron sphere. More crumbled circles combined with a creased triangle net have been added. The last four on all four sides have been folded but not crumpled. There are nine layers on each side making a thirty-six circled sphere displaying a tetrahedral design of four open triangles.

 

Below) Here are a few variations of individual units that can be made form the 8-frequce gird where the circle is reformed to a hyperbolic in/out pattern, in some cases looking totally different than what we associate with the mathematical saddle form. But then that is the advantage of folding circles, it will do the mathematically unexpected.

 

027img 6096es   028img 6077es

029img 6079es   030img 6082es

031img 6101es   032img 6098es

033img 6136es   034img 6090es

 

Following are a couple of systems developed from exploring  multiple units from above. There are many possibilities for combining the spherical, the flat, and the hyperbolic systems by folding and joining circles that does not happen with other shapes.

 

035img 6114es       

036img 6140es            

Above) a system made from joining two of one of the reconfigurations, making another the same and joining the two sets of two together.

 

 

037img 6042es

 

038img 6047es

Above)  Two views of an eight-unit circle using one of the units from above. From the side view you can see I decided not to complete the circle but keep it going in a helix form. I may continue to add by sequentially decreasing the diameter of each circle moving it into a conical helix or spiral form.

 

 

039img 6156es    040img 6159es

Above) Two views of two circles folded to a hyperbolic variation and joined in a tetrahedron arrangement.

 

 

041img 6274es        

042img 6272es   042aimg 6271es

Above) Another system with four circles folded to hyperbolic configurations and joined in a centered tetrahedral pattern. There are two views showing each end; one is an irregular variation of the other.

 

 

 

I always enjoy seeing the factual beauty in folding and reforming the circle, seeing the underlying structural truth about the nature of pattern as formations emerge, and to reflect on the good that comes from unity where all parts are multifunctional and interconnected allowing endless potential of expression throughout.

 

                                 043img 6199es

 

Read 18876 times Last modified on Friday, 28 December 2012 20:28